How to perform factory upgrade of EdgeOS on Ubiquiti Edgemax router

    June 11th, 2019

    Note: The router will need to be rebooted after the image has been applied

    Step 1

    To perform a factory upgrade, you will need to first download the latest firmware from Ubiquiti's website here:
    https://www.ubnt.com/download/edgemax/

    Step 2

    Login to the Ubiquiti router by typing 192.168.1.1 in your URL bar.

    Unless changed, login with the default username and password below:
    Username: ubnt
    Password:ubnt

    Step 3

    On the bottom left of the Dashboard GUI, select the tab labelled System

    Step 4

    Scroll down until you see Upgrade System Image

    Step 5

    Select the .tar image that you previously downloaded from Ubiquiti's website .

    Step 6

    After the upload and installation, the router will prompt you that it will need to be rebooted.

    Step 7

    After the reboot, you can then access the GUI by typing192.168.1.1 in the URL bar.

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Pilot’s local support team is here for you.

    Contact Support